Publicidad
Idiomas disponibles
Idiomas disponibles
SVT 1000
When placed on its stand, make sure that the surface
•
on which the stand is placed is stable.
The iron should not be used if it has been dropped, if
•
there are visible signs of damage or if it is leaking
water.
Keep the iron and its cord out of reach of children less
•
than 8 years of age when it is energized or cooling
down.
ATTENTION. Hot surface.
•
The surface can become hot during operation
The soleplate of the iron can become extremely hot
and may cause burns if touched.
Do not allow the cord to come into contact with the
•
soleplate when it is hot.
When you have finished ironing, when you clean the
•
appliance, when you fill or empty the water tank and
also when you leave the iron even for a short while: set
the steam control to position O, put the iron on its
heel and remove the mains plug from the wall socket.
WHEN YOU USE THE VERTICAL IRON FOR THE FIRST TIME, YOU MAY NOTICE A SLIGHT SMOKE
EMISSION AND LISTEN TO SOME SOUNDS PRODUCED BY EXPANDING PLASTICS. THIS IS ENOUGH
NORMAL AND STOPS AFTER A SHORT TIME. WE ALSO RECOMMEND RUNNING THE IRON ON A
NORMAL FABRIC BEFORE USING IT FOR THE FIRST TIME.
1. Before filling the tank, unplug the iron.
2. Remove the tank
3. Open the water filler cap and then pour the water into the tank with the help of the measuring cup up to
10
Publicidad
