Wiseup WIFI05 Manual Del Usuario página 5

[Note]:
See the table below for the explanation of different buttons on the live video screen.
Button Function
Audio
Snapshot
Remote Video
Recording
Horizontal Mirror
Vertical Mirror
Brightness
Contrast
4.3. Remote View Setup (WAN Mode)
>>Before you set up the remote view function, please make sure that the camera is
successfully added to your smartphone or tablet PC in the P2P (LAN) mode and the
P2P (LAN) WIFIconnection works well.
4.3.1. Launch the "BVCAM" APP.
4.3.2. Follow the steps below to set up remote view function:
Step 1: Tap the setting icon on the "Live video" page then choose "Device
Settings" or "Advance Config".
Step 2: Go to "WIFI Config" page, select a desired WIFI hotspot to enroll the camera
in.
Step 3: Tap "OK"to complete the remote view setup and the camera will reboot
automatically, your mobile device will be bound with the WIFI hotspot.
Tap this button to enable or disable the live audio output.
Tap this button to take a screenshot of the live video.
Tap this button to start or stop remote video recording.
Tap this button to flip the image horizontally.
Tap this button to flip the image vertically.
Tap this button to adjust the live video brightness.
Tap this button to adjust the live video contrast ratio.
Function Description