Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE
After each use
Clean and dry the unit with a soft cloth.
As needed
If the probe tips become dull, they may be resharpened with a
file. If points need replacement because of excessive wear, con-
tact Dri-Eaz for a replacement kit.
Battery Replacement
The HydroSensor is operates on the current from one 9-volt
battery.
Battery life depends on usage and storage conditions. Do not
allow probe tips to stay in contact with metal, damp cloth, car-
pet, water, cork or any other materials that will conduct electric-
ity.
If the indicator light no longer illuminates, it may be time to re-
place the batters. The battery is contained inside the handle
below the indicator light. To inspect and replace the battery,
follow these instructions:
1.
Remove the small screws that hold the handle halves to-
gether, and gently split apart the handle.
2.
Remove the old battery from its connectors and replace with
a new general-purpose 9-volt battery.
3.
Reinsert battery into handle.
4.
Align the holes of the handle halves and replace the screws.
Take care not to pinch any wires. Do not overtighten.
WARNING: This product and other substances that
may become airborne from its use contain chemicals,
including lead, known to the State of California to cause cancer,
birth defects, or other reproductive harm. For more information,
go to P65Warnings.ca.gov
07-00315E F245, F251
SPECIFICATIONS
Dimensions
HydroSensor I: 31 in.
HydroSensor II: 31 in. extended; 21 in. col-
lapsed
Probe tips
7/8 in. nickel plated steel
Shaft
Stainless steel
Handle
Injection molded
Indicator light
LED in handle
Weight
1 lb.
Power
One 9-volt DC battery (included)
ADDITIONAL PRODUCT INFORMATION and current
documentation is available at LegendBrandsRestora-
tion.com.
FOR PARTS AND SERVICE CALL YOUR LOCAL DIS-
TRIBUTOR or Dri-Eaz at 800-932-3030.
2
Dri-Eaz Products, Inc.
Publicidad
