Tabla de contenido
Publicidad
CAUTION!
Risk of injury!
Improperly secured cabinet may tip over and
cause injury.
− Make sure all parts are securely assembled.
− Secure the cabinet to a wall using four
screws (not included).
− Do not stand on the shelves.
NOTICE!
Risk of damage!
Improper handling of the cabinet may result
in damage to the cabinet or other property.
− Place the cabinet on a flat, even, and dry
surface.
− Do not place the cabinet on soft ground.
− Do not use the cabinet if any of the
parts are cracked, broken, damaged, or
deformed. Replace damaged parts only
with suitable original spare parts.
− Keep the cabinet away from hot surfaces
(e.g. wood burning stove).
First use
Checking the cabinet and package
contents
NOTICE!
Risk of damage!
Be cautious when opening the packaging
with a sharp knife or other pointed object, to
prevent damaging the cabinet.
1. Take the individual parts of the cabinet out of
the packaging.
2. Check to make sure all parts are included.
3. Check whether the individual parts of the
cabinet are damaged. If so, do not assemble
or use the cabinet. Contact the manufacturer
via the service address indicated on the
warranty card.
Assembling the cabinet
NOTICE!
Risk of damage!
Improper handling of the cabinet may result
in damage to the cabinet or other property.
− Assemble the cabinet on a flat, even, and
dry surface.
− Use caution when assembling the cabinet
and follow the instructions as written in
this user manual.
1. Insert the side panels
Insert the base feet
bottom
.
A
2. Insert the back panel
side panels
, ensuring it stays in position.
B
3. Insert the connections
and
to the side panels
00
N
4. Insert the side panels
and
.
M
N
5. Insert the back panel
of the side panels
B
position.
6. Insert the magnet
J
shelf
and fix it with 2 small screws
D
using a screwdriver.
7. Insert the shelves
D
instructions of the enlarged detail drawings
until the end. Position the shelf with the
magnet on the third position counting bottom
up.
8. Insert parts
,
H1
H2
9. Insert the metallic plates
panels of the doors and fix the plates with the
small screws
by using a screwdriver.
L
10. Left door: make holes by turning the screws
clockwise with a screwdriver. Insert the
I
handle
to the door and fix the handle
U
with the screws
I
careful to drill holes on the call out only.
11. Right door: make holes by turning the screws
clockwise with a screwdriver. Insert the
I
handle
to the door and fix the handle
U
with the screws
I
carefulv to drill holes on the call out only. The
plastic bag contains two additional screws:
First use
to bottom
.
B
A
,
,
and
to
W1 W2 W3
W4
to the rails of the
00
to the back panel
M
.
B
to the connections
B
to the two rails
00
, ensuring it stays in
on the back side of the
by
L
following the
and
on parts
.
P
C
to the upper
K
by using a screwdriver. Be
by using a screwdriver. Be
15
Publicidad
Capítulos
Tabla de contenido
