Pre-Operation Inspection - iPower AP168FB Manual De Operario

4. PRE-OPERATION INSPECTION

4-1. Fuel Inspection
·Is there gasoline in the tank?
·Is old gasoline being used?
·Is the fuel tank cap closed correctly?
WARNING:
Be sufficiently careful of heat and flame when handling the fuel. Not doing so could cause fire or explosion.
4-2. Air-cleaner Inspection
·Is the air-cleaner element dirty?
·When the air-cleaner element is dirty, clean it.
4-3. Engine Oil Inspection
·Is the engine filled with the recommended engine oil, and is the oil dirty?
·If there is not enough oil, if it is dirty, or it has been used longer than the specified time,
add or change the engine oil.
4-4. Inspect the Tightness of all Fasteners or Screws
·Are all the screws tight?
·Be sure to check the screw used to fasten the muffler.
(Do this when the muffler is cold)
4-5. Fuel and Oil Leaks Inspection
·Are there any fuel or oil leaks? If any are found repair them.
4 4