Publicidad
ASSEMBLY INSTRUCTIONS
Phillips Screwdriver, Slotted Screwdriver, Mallet or Padded Hammer,
A
E
x6
B
x6
C
x6
1) Glue three Wood Dowels (C) into each of the holes in the Left Leg Assembly (1) as
shown in FIGURE 1. Attach the Back (3) to the leg assembly with two dowels and two
Barrel Bolts (A) and Barrel Nuts (B). Tighten bolts with the Hex Wrench (E).
Attach the Front Apron (4) to the leg assembly over the dowel and fasten in place with
Barrel Bolt (A) and Barrel Nut (B).
Glue three Wood Dowels (C) into the holes in the Right Leg Assembly (2) as shown in
FIGURE 1. Attach the leg assembly to the Front Apron (4) and Back (3) as before.
D
x4
2) Slip the Seat (5) down between the legs
onto the seat braces. Attach to the leg
assemblies with Phillips Screws (D)
through the two predrilled holes in each
end of seat into the frame as shown in
FIGURE 2.
991KFSI Chelsea Chair
TOOLS REQUIRED:
Outdoor Wood Glue
x1
991KFSI – Page 3
Publicidad
