Mounting Location - SAS BAZOOKA MARDI GRAS Manual De Instalación

Before you start the installation, it will be necessary to find a mounting location for the
amplifier. Find a location in which the amplifier will receive adequate ventilation in order
to dissipate the heat it develops during operation. Two popular mounting locations are in
the trunk or under the seat.
Select the location in which you wish to mount the amplifier. Use caution when mounting
amplifier, there are many wires, gas lines, vacuum lines, brake lines as well as a gas tank in
the automobile. Make sure you know where they are when mounting the amplifier to avoid
puncturing lines, shorting wires or drilling holes in the gas tank. Once you are ready, use a
pencil to mark the mounting holes in the bottom panel. After you have marked the locations
of the holes move amplifier out of the way and drill small starter holes to make the tapping
screws easier to install. Use provided screws to tighten down the amplifie
M
OUNTING LOCATION
HIGH INPUT
BASS BOOST X-OVER X-OVER
LINE IN
6dB LPF HPF LPF
12dB
0dB FLAT FLAT
GND
CH1 CH2
CH1
MIN MAX 50Hz 250Hz 50Hz
GAIN X-OVER X-OVER
CH1 / CH2
CH2
6
HIGH INPUT
BASS BOOST LINE IN
HPF 12dB
6dB
0dB
GND
CH3 CH4
CH3
250Hz MIN MAX
GAIN
CH3 / CH4
CH4
MGA AMPLIFIERS
r.