Battery Charging; Connecting The Air Hose - Mangar International Airflo Mk3 Instrucciones De Uso

Airflo Mk3
Battery Charging - fig. 3
• Check the battery charger casing and lead
for signs of damage and if damaged DO NOT
USE.
• Fit the appropriate mains plug adaptor to the
battery charger (A).
• Plug the battery charger into a mains outlet
socket and connect the charger output lead
(B) to the Airflo charging socket (C).
• The battery status indicator light (D) on the Airflo
will flash green while the battery is charging
and then turn to a steady (non flashing) light
when the Airflo is ready for use.
NOTE: The charger is not capable of providing
sufficient power to charge the battery while the
compressor is running.
To maintain battery condition, It is recommended
that the Airflo is left continuously on charge when
not in use. The battery cannot be overcharged
using this charger.
WARNING: DO NOT recharge the battery in a
bathroom or in a damp environment.
Unplug the charger from the mains power socket
to disconnect the charger from the mains power
supply.
Connecting the Air Hose - fig. 4
Disconnect the Airflo from the battery charger and
place in a safe and convenient position.
Connect the air hose from the Mangar International
equipment to the air outlet socket (A). The connector
will 'click' into place when firmly pushed onto the
outlet. To release the hose, press the paddle down
on the connector (B).
4
B
3
B
A
4
A
C
D