InSinkErator Ultra System Manual Del Usuario página 3

HOW TO USE THIS INSTRUCTION MANUAL
These instructions are separated into main sections, indicated by numbers, and subsections,
indicated by capital letters. The manual is setup this way to allow you to take a break at any
point after completing a section or subsection without affecting the installation process.
What you'll see in the
instruction manual:
Provides a step-by-step narrative describing the installation step, with check boxes that
1
can be marked as you progress through the installation.
2
Contains simple illustrations that provide visual instruction to support the narrative.
3
CAUTIONS, WARNINGS and DANGERS that will require your attention during the step.
An imminently hazardous situation, which, if not avoided, will result in death or serious injury.
A potentially hazardous situation, which, if not avoided, could result in death or serious injury.
A potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.
Note: Tank must be located
within 16" of faucet and
within 30" or less of a
standard grounded outlet.
DO NOT extend plumbing or
electrical lines.
A standard 120-volt
grounded electrical
outlet is required
under the sink for the
unit's electrical power.
INSTALLING THE FAUCET
A
2
Property Damage: Do not pinch or break copper
tubing. Do not distort the last 1 inch of tubing.
Unpack faucet components.
On a firm, flat surface, carefully
straighten the copper tubing.
■
3
2"
1
A minimum of
2" of space is
required from
the center of the
faucet head
to the back wall
in order for this
appliance to
operate properly.
3