Faucet Installation - Kohler K-6350 Guia De Instalacion

Hose
Connector

3. Faucet Installation

Position the bracket, washer and nut onto the mounting stud
from the underside of the sink.
Position the faucet and escutcheon on the sink to obtain the
desired alignment.
Tighten the nut to secure the faucet onto the sink. For best access,
use a socket wrench with a 7/16" deep socket.
NOTE: The weight must be installed to act as a pull stop and to
prevent kinking damage to the hose.
Attach the weight to the hose 23" (58.4 cm) from the loose end of
the hose. The weight may be moved to adjust the pull-out length
of the hose.
Carefully tighten the weight screws. Do not overtighten.
Reconnect the hose to the hose connector.
Kohler Co.
Bracket
Washer
Nut
Weight Screw
Hose
Weight
23" (58.4 cm)
5 1025490-2-B