If headset or microphone is plugged in during the Wizard Setup, the sound can only be heard from your
headphone and instructions on voice commentary will not be displayed. Therefore, plug in headset or
microphone after you complete Wizard setup so as to follow the headphone/ microphone instructions.
All commentary added will be mixed with the gameplay sound. Also, as long as the headphone is connected
to the device, all your commentary and background sound will be recorded. Therefore, remember to stop
recording and remove the headphone when no commentary is needed.
If the microphone is disconnected/ connected to the Capture Box during recording, the sound will also be
recorded. To make sure the Please avoid plugging off the microphone during recording process.
The volume you hear in the commentary test may be slightly different from the actual recording. It is
recommended that you run an mock test beforehand to be familiar with the recorded volume.
It is normal to hear your own voice when recording with HDMI input source.
No OSD will be shown when you connect only the headphone to the Capture Box.
English-34