Safety Instructions - Warner 11067 Manual Del Usuario

Operating Instructions
1. Plug the light into properly grounded circuit.
2. Turn the light on by pushing the rubber button switch located on top of the
fixture.
3. Always make sure the light is placed on a firm level surface.

Safety Instructions:

1. The user must read and understand all instructions and labels attached
before using.
2. Do not submerse. Under wet or damp conditions use GFCI protected
circuits only. Keep plugs and receptacles dry.
3. Keep light at least 16 feet away from pools, spas or standing water.
4. Do not use with extension cords near water or where water may
accumulate.
5. Use only outdoor rated extension cords that have the three-prong grounding
plug.
6. To prevent fire or explosions keep the fixture away from all flammable
materials.
7. Never look directly into the light to avoid eye injuries.
8. The aluminum housing conducts electricity. Use extreme caution to avoid
contact with electrical wiring.
9. Do not pull on power cord to move this product.
10. Inspect cords and connections for any wear or damage before each use.
11. Never use this product if the light is damaged or bare wires are exposed.
If you require additional information, contact: Bull Dog Customer Service
1-800-444-0606.
1-year Limited Warranty
2