Maintenance; Cleaning Your Tv; Screen, Frame, Cabinet And Stand; Power Cord - LG 42LA6150 Manual Del Propietário

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

32
MAINTENANCE / TROUBLESHOOTING

MAINTENANCE

Cleaning Your TV

Clean your TV regularly to keep it at peak performance and to extend the product lifespan.
CAUTION
Before cleaning, turn the power off and disconnect the power cord and all other cables.
y
y
When the TV is left unattended or unused for a long time, disconnect the power cord from the wall outlet to
y
y
prevent possible damage from lightning or power surges.

Screen, frame, cabinet and stand

To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent. Then wipe
immediately with a dry cloth.
CAUTION
Do not push, rub, or hit the surface with your fingernail or a sharp object, as this may result in scratches on the
y
y
screen and image distortions.
Do not use any chemicals, such as waxes, benzene, alcohol, thinners, insecticides, air fresheners, or lubricants, as
y
y
these may damage the screen's finish and cause discoloration.
Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or malfunction.
y
y

Power cord

Remove the accumulated dust or dirt on the power cord regularly.

TROUBLESHOOTING

Problem
Cannot control the TV with the remote
control.
No image display and no sound is
produced.
The TV turns off suddenly.
Check the remote control sensor on the product and try again.
y
y
Check if there is any obstacle between the product and the remote control.
y
y
y
y
Check if the batteries are still working and properly installed (
Check if the product is turned on.
y
y
Check if the power cord is connected to a wall outlet.
y
y
Check if there is a problem in the wall outlet by connecting other products.
y
y
Check the power control settings. The power supply may be interrupted.
y
y
Check if the Auto sleep feature is activated in the Time settings.
y
y
If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of
y
y
inactivity.
Solution
to
,
to
).

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido