Breakdowns - Auping AVS 411 Manual De Instrucciones

5. Breakdowns

The table below gives possible solutions to malfunctions.
If you have any doubts contact your dealer.
Undesirable noises (bed
squeaks and creaks)
Undesirable noises (bed
squeaks and creaks)
Undesirable noises (bed
squeaks and creaks)
Undesirable noises (bed
squeaks and creaks)
Undesirable noises (bed
squeaks and creaks)
_03PI0_4458 BW.pdf - pag.17
All manuals and user guides at all-guides.com
Cause Search
Caused by moving parts
touching each other.
The box spring is not
leveled because the
floor is not absolutely
flat.
The reason for this may
be a missing part, or
parts that have not been
tightened properly or
have become loose when
the bed was moved.
The bed is not
positioned away from
the wall.
There are unwanted
objects in the bed that
should not be there
(spoons, forks, pens,
etc.).
LET OP !!! Lage resolutie!
Solution
Apply Teflon spray.
Do not use oil.
Make sure the floor is
absolutely leveled.
Tighten parts.
Position the bed away
from the wall.
Remove those objects.
GB17
November 12, 2009