Cleaning And Maintenance; Technical Data - Adler europe AD6601 Manual De Uso

Ocultar thumbs Ver también para AD6601:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 12
device.
9. Take special care when grilling foods with high humidity or high fat content - they may
ignite.
DESCRIPTION OF THE MACHINE (Fig. 1)
The stand is included only in the AD 6602 grill.
1a. Grate
1c. Power cable.
1e. Grill body
ASSEMBLY
Assemble the grill rack AD 6602 according to the diagram (Fig. 2).
1. Place the heater (1b) with thermostat (1d) on the grill body (1e).
2. Place the grill (1a) on the grill body (1e).
USING THE APPLIANCE
Before first use:
1. Clean the grill and all accessories thoroughly.
2. Assemble the grill according to the INSTALLATION point.
3. Fill the water tank to the "max" level (Fig. 3).
4. Start the grill. Do not put anything on the rack. Set the thermostat knob to medium temperature. Leave under supervision for 20
minutes. During this time, smoke and the smell of burning heaters may come out from the grill - ensure good ventilation.
BBQ:
1. Fill the water tank to the "max" level (Fig. 3).
2. Turn on the electric grill.
3. Turn the thermostat knob to the "max" position. The indicator light will come on to indicate the heater is working.
4. After about 5-10 minutes, the heater will reach the right temperature to start grilling. Put food on the rack. Turn down the temperature
knob
5. You can adjust the grilling temperature by turning the thermostat knob. Depending on the set temperature, the heater and indicator light
will turn on and off.
6. The grill can also keep the previously prepared food warm - set the thermostat knob to the closest to the minimum.
7. During grilling, water from the tank evaporates. Check the water level regularly so that it is not less than the "min" level. Be careful not
to wet the heater when topping up.
8. When you finish grilling, set the thermostat to position "0" and remove the plug from the socket.

CLEANING AND MAINTENANCE

1. Before cleaning, make sure the grill has cooled down. Make sure the power plug is unplugged from the outlet.
2. Disconnect the heater and control panel from the grill body. Never immerse the heater and control panel in water.
3. Wipe the heater only with a dry cloth.
4. Clean the grill and grill body in water with the addition of dishwashing liquid. Dry. Do not use strong detergents or sharp cloths.

TECHNICAL DATA

Supply voltage: 220-240V ~50 60Hz
Power: 2000W max: 2400W
Please transfer cardboard packaging to waste paper. Pour the polyethylene bags (PE) into the plastic container
Worn device should be returned to the appropriate point storage because it is dangerous in the device
ingredients may pose a threat to the environment. The electrical device should be handed over to limit
its reuse and use. If in the device there are batteries you have to take out and give to the point stored separately.
WICHTIGE HINWEISE FÜR DEN SICHEREN GEBRAUCH
SORGFÄLTIG DURCHLESEN UND FÜR DIE ZUKUNFT AUFBEWAHREN
1. Lesen Sie vor dem Gebrauch des Geräts die Bedienungsanleitung und befolgen Sie die
darin enthaltenen Anweisungen. Der Hersteller haftet nicht für Schäden, die durch nicht
1b. Heater
1d
Thermostat knob
(DE) DEUTSCH
ALLGEMEINE SICHERHEITSBEDINGUNGEN
5

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ad6602

Tabla de contenido