Installation With A Three-Point Seat Belt; Installing The Baby In The Seat - JANE Exo basic Manual Del Usuario

2 Installation with a three-point seat belt

2a Place the EXO BASIC seat in the most recli-
ned position (see section 5, reclining the seat).
Pass the three-point seat belt buckle between
the base and the seat (13) and fasten it.

3 Installing the baby in the seat

3a Loosen the harness pulling the straps
over the buckle while pressing the tightening
button.
3b Unfasten the buckle (5). To make it easier to
install the baby in the seat, you can fasten the
seat belts in the side straps.
3c Position the baby in the seat making sure
2b
Slide the shoulder strap of the vehicle seat
belt through the clip (14) on the top part of the
seat, only on the opposite side from the buckle.
Close the clip.
2c
Press the EXO BASIC against the seat and
manually tighten the vehicle seat belt.
that he is sitting as far back as possible and
with the backrest upright. Join together the
upper ends of the buckles.
3d Insert them in the lock and press until it
clicks.
3e
Pull the tightening strap (6).
35