Warning
Only touch the instrument handle for any voltage detection. Do not
touch the tip of the instrument while testing.
Warning
The instrument may only be used within the operating ranges as
specified in the technical data section.
Warning
The instrument can only be used in properly grounded electrical
installations.
Warning
Before use, check the instrument for damages. Do not use the tester
if damages are detected.
Warning
The signal during the voltage detection does not provide any
indication of the type and level of voltage present. In case of doubt,
measure the voltage with a 2-pole test instrument (e.g. EazyVolt)
When testing mains connected cables for interruptions, the user
must ensure that one of the lines is connected to phase (L).
Features
•
Contact-free voltage detection 50...1000 VAC
•
Auto-Power off after 3 minutes
•
ON/OFF switch to improve batteries lifetime
•
Automatic Self-Test: The unit will constantly blinking when
active. Only in case of Live voltage the front LED will stay on
permanent with a Beeping sound
•
Optic and acoustic signal contact-free detection of AC voltages
on (insulated) cables and conductors
•
Locating line interruptions in (insulated) cables and conduc-
tors.
•
Phase tester of sockets
•
Phase determination of AC lines (3 phase), multi core cable
and wall sockets
•
All under condition of proper earthing through user
Nieaf-Smitt is a brand name of Mors Smitt
11
www.nieaf-smitt.com