Publicidad
11
Position the Back Panel (I) as shown. Flush with the lower edge of the Bottom (G).
Align squarely with outer edges and nail straight into the raw edge of the panels.
Assure that the unit is square.
Distance from corner to corner must be
equal as shown.
7
x34
WARNING
Please make sure that the Back Panel is attached securely.
All nails must be driven into the parts straight and centered.
Failure to do so could cause instability, product collapse,
and/or serious injury.
ADVERTENCIA
Por favor asegúrese que el Panel Trasero se atan
firmemente. Todos los clavos deben manejarse en las partes
recto y centro. El fracaso para hacer para que podría causar
inestabilidad, derrumbamiento del producto, y/o la lesión
seria.
7
superficie cruda
I
IMPORTANT!
THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY.
All nails should be used. This is the single most important step for overall strength and stability.
This is what keeps the unit from wobbling.
16 /19
raw surface
G
turn the unit onto its front
apagar la unidad en su frente
B341851335W0 0
Publicidad
