Technical Specifications; Battery Operation - Cuda surgical LLS-2054BE Manual De Usuario

3.

TECHNICAL SPECIFICATIONS

Input
Output
Operating Temperature
Storage Temperature
Contacts
Dimension (without battery adaptor)
Weight (without battery adaptor)
Regulatory Approvals
Water Resistant
4.

BATTERY OPERATION

FUEL GAUGE: Each LLS-2054BE battery is equipped with a fuel gauge that displays
the relative charge state of the battery. To activate the fuel gauge, press the small
circular button next to the gauge. Each LED on the fuel gauge represents 25% of the
fully charged capacity. Below is the fuel gauge legend:
•
All four LEDs illuminated – Capacity = 76 – 100%
•
Three LEDs illuminated – Capacity = 51 – 75%
•
Two LEDs illuminated – Capacity = 26 – 50%
•
One LED illuminated – Capacity = 10 – 25%
•
One blinking LED – Capacity < 10%
CHARGING: The LLS-2054BE should only be charged with ST Technologies
smart battery chargers. To charge, orient the battery to line up the charger and battery
LIT-234
CUDA Surgical
®
(English)
Item
Figure 1. The LLS-2054BE Battery
Specification
17.4V 2.17A max
15V 3.2A nominal, 4.25A max.
32⁰F to 113⁰F (0⁰C to 45⁰C) while charging
-4⁰F to 140⁰F (-20⁰C to 60⁰C) while
discharging
-4⁰F to 140⁰F (-20⁰C to 60⁰C) max.
-20⁰F to 25⁰F (-20⁰C to 77⁰C)
recommended
+, C, D, T, -
(LxWxH) 3.4in x 3.0in x 0.9in
0.53lbs
UL listed, UN 38.3 and CE
Not Protected Equipment, IPX0
®
supplied
Rev. -
Date of Revision: 01/26/18
Page 4 of 30