Remote Control - Klarstein 10034654 Manual Del Usuario

Symbol Function
ON
OFF
SPEED
- +
/
TIME
SWING
right/left
SWING
high/down
COOL
MODE
Description
In the standby, press this button, then the digital
display screen show temperature, and the wind
wheel motor at low speed wind start.If shut down
in the cool function,the water pump should
be turn off approximately 15 minutes
before the fan is turn off. This will allow the cool-
ing pads to dry out and extend their life
Press this button to select desired fan speed, (8 speeds).
In turn. The corresponding speed indicator light will be
displayed. The motor delays 5 seconds for the first start.
TIME: It can be set between 1 to 12 hours, with hourly
incremental intervals, When the digital display 12 hours,
press this button again to cancel and display'0' after
flicking 5 seconds automatically display the temperature:
Press once this button can auto left and right swing.
Press again this button to cancel.
Press once this button can auto up and down swing.
Press again this button to cancel.
press this button to control the switch of cool function
(first on, second off).
Press this key to switch between the functions of manual
speed , natural and sleep.
EN
+
-

Remote control

15