Disposable Concrete Anchor Strap - Sperian Miller Manual Del Usuario

Ocultar thumbs Ver también para Miller:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3.5 Disposable Concrete Anchor Strap (8185C)
The Disposable Concrete Anchor Strap is designed for one time use to provide a single user with
an easily installed anchorage connector while working on concrete forms.
Warnings and Limitations
• For use by ONE person only. Maximum capacity is 310 lbs. (140.6 kg), including tools. —
DO NOT EXCEED THIS WEIGHT.
• Use only locking carabiners, locking snap hooks or other Miller approved connectors or
connecting devices to attach to this equipment.
• The structure that this product is attached to must be capable of supporting a 5,000 lb.
(22.2kN) static load or provide a 2:1 safety factor in the direction of pull.
Installation
1. Place loop end of anchor strap over rebar as shown (see Fig. 5).
2. Attach connecting device to the D-ring with a compatible locking carabiner, locking snap hook
or other Miller approved connector only.
WARNING: Next CoNCRete ColumN must be pouReD. stRAp must be CoNtAINeD
pRIoR to use.
Removal: After use, cut strap off flush
with surface of concrete column. Properly
discard to prevent inadvertent further use.
E ng li sh
Fig. 5
10
Rebar
Loop End
Disposable
Concrete Anchor
Strap (#8185C)
D-Ring
Concrete
Column

Publicidad

Tabla de contenido
loading

Tabla de contenido