Cadco XAFT Guia De Inicio Rapido

PROGRAM QUICK ACCESS BUTTONS
1 Press START / STOP Button to activate control board.
Press desired PROGRAM button P1 - P6. (Then, to access P7-
2
P99, press until desired program appears.)
Press STEP button repeatedly until “PRE” [Preheat] LED
3
lights up.)
Set PREHEAT TEMPERATURE by pressing
4
desired temperature appears.
5
Press STEP button once (STEP 1 LED will light)
6
Set TIMER by pressing
7
Press SELECT button once (TEMPERATURE LED will light.)
Set COOKING TEMPERATURE by pressing
8
until desired temperature appears.
(Optional - for humidity; otherwise skip to 11)
9
Press SELECT button once (HUMIDITY LED will light)
Set HUMIDITY by pressing
10
appears (from “oFF” to “100% in 20% increments.)
Save the program by holding down the MEMORY
11
for 3 seconds until you hear the beep.
STARTING A PROGRAM
1 Press START / STOP Button to activate control board.
Press desired PROGRAM button P1 - P6. (See instruction manual
2
for accessing programs P7 or higher.)
3 Press START / STOP Button to start program.
XAFT OVENS QUICK START GUIDE
or until
or until desired time appears.
or
or until desired humidity %
button
M
ADDING or SUBTRACTING PROGRAM TIME
1
Press SELECT button until the TIMER LED is illuminated.
While a program is running, you may press
2
add or subtract time. This will not affect a saved program.
P1 P6
CONTINUOUS RUN SETTING
STEP
1 Press SELECT button until the TIMER LED is illuminated.
2
Press Button until INF appears on the LED screen.
3
Press START / STOP Button.
STEP
STOP A PROGRAM IN PROGRESS
Press and hold START / STOP Button for 2-3 seconds.
SELECT
1
Press START / STOP Button to activate control panel.
2
Press SELECT Button until TIMER LED is illuminated.
SELECT
Set TIMER by pressing
3
(For continuous run, press
4 Press SELECT button once (TEMPERATURE LED will light.)
M Set COOKING TEMPERATURE by pressing
5
until desired temperature appears.
(Optional - for humidity; otherwise skip to 7.)
6
Press SELECT button once (HUMIDITY LED will light.)
Set HUMIDITY by pressing
7
appears (from “oFF” to “100% in 20% increments.)
P1 P6
Press START / STOP Button to start the cooking cycle.
8
See instruction manual for additional options & information
or
MANUAL OPERATION
or until desired time appears.
until INF appears on LED screen.)
or until desired humidity %
SELECT
to
SELECT
SELECT
SELECT
or
SELECT
6/28/2016 RV03