Publicidad
Idiomas disponibles
Idiomas disponibles
Assembly Instructions
Step 2:
Align holes of Side Panel (B) with the holes of Stand Leg
(H) making sure curve of the leg is pointed outward. Insert
screw through Leg and Side Panel hole. With both screws
inserted, align another Side Panel on the opposite side of
the Leg forming a corner as shown in (Figure 1).
Step 3:
Secure both Screws with Nuts and hand tighten only at this
point (Figure 2). Repeat step until all four legs are in place.
Repeat until stand is completely assembled. Tighten all
hardware with Phillips screwdriver and wrench (Figure 3).
Step 4:
Place completed stand on level surface and insert Fire Bowl
(A) on Stand (Figure 4).
Step 5:
Place Log Grate (I) in bottom of Fire Bowl (Figure 5).
Step 6:
Attach Handle to Spark Screen with hardware provided.
Place Spark Screen on bowl (Figure 6).
General Care
• Fire bowl may be cleaned with water and mild detergent.
• Do not use abrasive detergents or pads to clean surround or fire bowl.
• As with any outdoor grill, periodic maintenance is required to
return painted steel surfaces to original appearance. Remove any
rust with sandpaper or steel brush and repaint with grill paint suitable
for high-temperature surfaces. Follow manufacturer's instructions.
(cont.)
Figure 1
Figure 3
Figure 5
Please contact us if you have any problems or questions regarding this product.
Toll Free: (800) 230-6530, M-F, 9 a.m. - 5 p.m. EST.
Figure 2
Figure 4
Figure 6
Customer Service
Email: customerservice@asiadirectinc.net
Visit us online at: www.asiadirectinc.net
AD218OM (3/08)
Publicidad
