Security Instructions - M Confort E2000 Manual De Usuario

MCONFORT E2000
VII. INSTRUCTIONS FOR USE
1. Do not disassemble or a empt to repair the equipment without proper
knowledge.
2. To avoid a short circuit, keep the equipment dry.
3. Disconnect from the power to fill water or clean the equipment.
4. Disconnect from power when the equipment is not in use.
5. Do not insert any object through the grid when the equipment is in opera on.
6. Do not use in flammable environments.
7. Place the equipment in a flat place.
8. Protect the equipment from direct sunlight.
9. Maintain the water level between the MIN and MAX marks.
10. A er filling the tank, try not to move the equipment to avoid spilling the water.
If you need to move it, do it carefully.
11. Never lay down the equipment, especially if it has water inside it. If the
equipment accidentally overturns, disconnect immediately from the power supply
and dry the equipment completely before using it again.
12. Do not place any object on the equipment or cover the air outlet.
13. Disconnect the equipment to clean it. Do not use corrosive products for
cleaning. A cloth moistened with water is enough to keep the equipment clean.
14. Keep air inlets and outlets away from curtains or walls.
15. Do not hit or shake the equipment. If this happens it will stop automa cally.
16. A er some me of use it is possible that the water in the tank is dirty and it is
recommended to empty this dirty water and clean the tank.
17. A er using the equipment in cold mode it is recommended to have it running
in ven la on mode for a few minutes to dry the water filters. With this ac on a
longer useful life of the filters is guaranteed and odors will not be generated.
18. Do not use the equipment in case of a malfunc on. Contact the technical
service as soon as possible.
16