Altec Lansing InMotion IM3cBLK Guia Del Usuario página 4

M
IN OTION I
Portable Audio System
Thank you for purchasing this Altec Lansing product. For generations, Altec
Lansing has been first in audio innovation. Today, our line of powered
speakers has received more performance awards than any other brand. In
all kinds of desktop environments, in every price range, Altec Lansing offers
sound of distinction — giving even the most demanding customers the
audio enjoyment they seek. Just listen to this!
Box Contents
• inMotion iM3 portable audio system
• Wireless remote control with battery
• Universal power supply
• Docking adapters for various iPod sizes
• Protective carry bag
• User's guide and quick connect instructions
Made for:
• iPod
• iPod nano
• iPod mini
Placing the MOTION
IN
Position the inMotion iM3 system on a level surface, preferably close to you
(within three feet). The inMotion iM3 system can be placed close to video
displays such as TVs and computer monitors without distorting the image.
Making Connections
Place the appropriate iPod docking adapter inside the docking bay. iPod
docking adapters are labeled for iPod identification.
Note: Alternate audio sources — such as non-dockable iPods, CD players,
MP3 players, portable DVD players, and laptops — can also be connected to
the inMotion iM3. For more information, see the "Connecting to alternate
audio source" section.
Power
Use one of the following two options to power your inMotion iM3:
AC (Wall outlet) Power
Insert the barrel connector from the power supply into the DC connector
on the rear of the inMotion iM3. After this connection is made, insert the
power supply into a wall outlet.
DC (Battery) Power
Install four AA batteries (or LR6) into the battery compartments on the
bottom of the inMotion iM3 (two to each compartment). Make sure the
batteries are installed as illustrated in the battery compartments (batteries
not included).
Start Playing
1. Turn on your iPod.
2. Turn on the Altec Lansing inMotion iM3 system by first positioning the
power switch located on the back of the unit to the "On" position, then
pushing the standby button located on the front panel
will light next to the button when the power is on. The LED will turn
amber in color to indicate when the batteries need to be replaced.
Note: To avoid hearing a popping sound when you turn on your Altec
Lansing speaker system, always turn on your audio source first.
M3
M3 system
I
. A green LED
Power Off
To maximize battery life during battery-only operation, position the power
switch located on the back of the unit to the "Off" position for power off.
Auto Shut-down (Standby)
During battery-only operation the inMotion iM3 system automatically shuts
down/goes into standby mode if no audio is detected within two minutes.
While this mode reduces battery consumption, it does not completely turn
the iM3 off. To maximize battery life when not using the iM3, turn the
power switch located on the back of the unit to the "Off" position.
NOTE: The Auto Shut-down (Standby) feature is active during battery-only
operation. If the AC wall adapter is used, the iM3 will remain on as long as
the power switch is in the "On" position.
Connecting to alternate audio source
The inMotion iM3 system includes an auxiliary input jack that allows you to
connect to alternate audio sources, such as non-dockable iPods, CD players,
MP3 players, portable DVD players, and laptops. To connect the iM3 to an
alternate audio source, follow the steps below.
1. Locate a 3.5 mm stereo cable (not included).
2. Connect one end of the 3.5 mm stereo cable into the auxiliary input jack
(AUX) located on the back of the inMotion iM3 system, and the other end
to the headphone or line out jack on your alternate audio device.
3. Set the volume on the audio source at mid-level.
4. Set the volume on the inMotion iM3 at minimum level and adjust upward
to a comfortable listening level.
Volume
The "+" and "–" buttons on the front of the inMotion iM3 system are the
master volume controls for the speaker system. Press and hold the "+"
button to increase the volume and the "–" button to decrease the volume.
Wireless Remote Control
Power On/Stand-by
The power button on the Altec Lansing inMotion iM3 remote control
can be used to turn the unit on and place the unit in stand-by mode.
A green LED will light on the inMotion iM3 system when the unit is on.
Volume Control
The "+" and "–" buttons are the remote volume controls for the speaker
system. Press and hold the "+" button to increase the volume and the "–"
button to decrease the volume.
Pod Functions
I
When an iPod is docked into the inMotion iM3 system and the inMotion
iM3 system is turned on, some iPod functions can be controlled using the
inMotion iM3 system's remote control.
Note: The inMotion iM3 remote control will provide song navigation
functions only with newer iPods running iPod software version 2.1 or later.
1. Play/Pause Function: Press the Play/Pause button
the selected song. Press the Play/Pause button again to pause the song.
2. On/Off Function: Press and hold the Play/Pause button
off. Press any button on the iM3 remote to turn the iPod back on.
3. Track Forward/Track Back Function: Press the Track Forward button
to skip to the beginning of the next song. Press and hold the Track
Forward button to fast-forward through the song. Press the Track Back
button to skip to the beginning of the song currently being played.
Press and hold the Track Back button
2
once to start playing
to turn the iPod
to rewind the song.