Assembly - HAMPTON BAY PG169T-B Guía De Uso Y Cuidado

Assembly

1
Assembling the Housing
Assembly
□ Remove the door from the housing assembly (E) by
lifting the door off the hinges. Insert the bottom of
the housing assembly (E) into the top of the plastic
ring (F) and attach to base (G) with M4 x 10 bolts
(CC). Reattach the door to the housing assembly
(E).
3
Assembling the Top Wire
Guard
□ Attach the top wire guard (C) to the bottom wire
guard with glass tube assembly (D) using ST 4.2 x
10 mm Screw (BB), then insert the reflector spacers
(I) onto the top of the bottom wire guard with glass
tube assembly (D).
2
□
□
E
Door
F
CC
G
7
Please contact 855-HD-HAMPTON for further assistance.
Assembling the Bottom Wire
Guard with Glass Tube
Assembly
Attach the glass cap (H) to the bottom wire guard
with glass tube assembly (D) using Ф4 washers
(DD) and M4 nuts (EE).
Attach the bottom wire guard with glass tube
assembly (D) to the housing assembly (E) using M4
x 10 bolts (CC).
D2
HAMPTONBAY.COM