Disposal; Repair Service; Guarantee; Legal Regulations - stayer COM6 Manual De Instrucciones

Remove the filter from the compressor (Fig.13-14):
by unscrewing the thumb screw on the air filter. You can
then remove the filter from the two halves of the plastic
housing, tap it to remove the dirt and then blast it down
with low pressure compressed air (approx. 3 bar) before
reinserting it.

5.2. Disposal

It is compulsory to subject electric tools, accessories and
packaging to a recovery process that respect the
environment.
For EU countries only:
Do not throw away electric tools!
In accordance with European Directive
2002/96/EC on unserviceable electric and
electronic apparatus, after its transposition
into national law, they must be collected
separately to subject them to ecologic
recycling.
The right to amendment is reserved.

5.3. Repair service

The technical service will provide you advice regarding
questions you may have on the repair and maintenance
of your product as well as on spare parts. You may also
obtain exploded views and information on spare parts on
the internet under: info@grupostayer.com
Our equipment of technical advisors will be glad to guide
you regarding acquisition, application and adjustment of
products and accessories.

5.4. Guarantee

Guarantee card
Included in the documentation that accompanies this
equipment, you should find the warranty card. You
should fill out the card completely and return to vendor
with a copy of purchasing receipt or invoice and you
should receive a receipt.
Note! If you cannot find the warranty card within the
documentation, you must ask for it through your
supplier.
The warranty is limited only to manufacturing defects and
expire if pieces have been removed or manipulated or
repaired other than the manufacturer.

6. Legal Regulations

6.1. Technical features

The values given are valid for nominal voltages [U]
230/240 V ~ 50/60 Hz - 110/120 V ~ 60Hz. For lower
voltage and models for specific countries, these values
can vary. Please observe the article number on the type
plate of your machine. The trade names of the individual
machines may vary.
ENGLISH
14
We reserve the right to change related to
technical advance.
W = Rated input power
1
P = Compressor speed
P = Operating pressure
2
V
= Pressure vessel volume
1
P
= Theoretical intake rate
3
IP = Protection type
M = Weight
a = Acceleration
hw
L = Sound pressure level
A
P
L = Sound power level
WA
The noise level when working can exceed 77 dB (A).

6.2 EC Declaration of conformity

The undersigned:
STAYER IBERICA, S.A.
With address at:
Calle Sierra de Cazorla, 7
Área Empresarial Andalucía - Sector 1
28320 PINTO (MADRID)
Tel.: +34 902 91 86 81 / Fax: +34 91 691 91 72
CERTIFIES
We declare under our sole responsibility that this product
is in conformity with the following standards or
standardized documents:
UNE EN 55014-1:2008/A1:2009, UNE EN 55014-2/ A1:2002,
UNE EN 61000-3-2:2006/ A1:2010,UNE EN 61000-3-3:2009,
UNE EN 1012-1:2011, UNE EN 60204-1:2007 CORR:2010,
UNE EN 286-1:1999/A2:2006
2006/42/CE, 2004/108/CE, 2006/95/CE, 2009/105/CE.
That the machine:
Type: COMPRESSOR
Models: COM6 / COM 24 / COM50/
SILENT50 / SILENT70
Ramiro de la Fuente
14
according to EU Regulations
Director General