SATA AE5723 Manual Del Uso página 11

Step 1: Connect the battery clip to the vehicle battery （red + black -）.
Step 2: Remove the silicone plug, and insert the terminal of the battery cable into the corresponding port of the product.
Step 3: Ignite and start the vehicle.
Step 4: Remove the battery connecting wire terminal, and then remove the connecting wire from the vehicle battery.
Attention:
If the red and green lights on the side of the battery clip box flash, press and hold the switch on the side
until the green light is normally on
Operation diagram of portable power source:
Step 1: Insert the USB charging cable into 5V/ 2.1A USB output port of the product.
Step 2: Connect USB charging cable to mobile phone or other digital equipment.
Step 3: After the connection is completed, push the switch to "ON" for charging
AE5723
中文
EN DE RU KO JA
PT ES
11