Braven BRV-X Guia De Inicio Rapido página 8

IMPORTANT - To ensure your BRAVEN BRV-X speaker
is prepared for use in a wet environment, remove all cable
connections and tightly close the end water cap. If the
water cap is not properly closed, the BRAVEN BRV-X will
not be water resistant.
TIE DOWN STRAP INSTALLATION
4
The included strap is designed to help you take your
BRV-X anywhere you want to go.
TO INSTALL THE STRAP:
The strap should be threaded through the two aluminum
posts found at each end of the speaker.
Unclip one of the buckles, and unthread the strap from
release buckle.
Thread the now-bare strap up through the bottom of the
post on one side of the speaker and pull the strap through
to the post on the other side. Continue to thread the strap
down through the second post.
RELEASE BUCKLE