中文
AE5821
EN
DE
RU
KO
PT
JA
ES
Overall dimension of the product:
Installation and operation:
Installation procedure:
1) First install 4 casters on the two underframe assemblies with bolts and washers.
2) Install the two underframe assemblies at the bottom of the pump body and ensure that the bolts and washers are effectively
tightened.
3) Install the bracket head on the piston rod of the pump body and lock it with bolts.
4) Install the safety plate, hook, eyebolt, and chain on the bracket head with bolts, washers, and wing nuts.
5) Loosen the filler vent nut before use.
Raising procedure:
1) Move the bracket to the specified position, depress the pump pedal, and raise the bracket head to the specified height as needed.
Lowering procedure:
1) Place the load in the center of the bracket at a balanced position and secure with a chain.
2) Turn the unloading valve stem (counterclockwise) to lower the bracket head. After that, restore the unloading valve stem.
3) Movement under load shall be slow and requires special care.
12