Advanced Operation; Technical Specifications - KlipXtreme Rubic Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

IV. Advanced operation
Pairing the speaker with wireless devices
Note: Before installing this product, please make sure your device has the built-in Bluetooth
1.
Plug the unit and press
button on the unit or the
speaker functions.
2.
Next, enable the Bluetooth
feature on your audio device and set it to discover the wireless speaker.
®
3.
Remember to place your wireless device and the speaker not more than one meter away from
each other.
4.
Select the Bluetooth
feature on the speaker by pressing the Source button found on the front
®
panel or the remote control. The blue LED will start blinking fast, accompanied by a tone, to
indicate that the speaker has entered into the pairing mode.
5.
Once the speaker appears listed under the newly found Bluetooth
wireless device, it will ask if you want to pair with it.
6.
Accept by pressing Yes or Ok. If you have a lower Bluetooth
enter the passkey 0000 (4 zeros).
7.
When pairing is successful, another short beep will be generated, making the blue LED appear
steady on the front panel. If after 60 seconds the pairing process fails, please repeat steps 1 through
6 described above.
8.
The speaker re-pairs automatically with memorized devices after being turned off and on again.
feature available.
®
button on the remote to activate the
devices (KWS-711) of your
®
version, you may be prompted to
®

Technical specifications

MPN
Device
Type
Maximum power output (P.M.P.O)
RMS output power (reference)
DC input
Buttons
Speaker
Driver units
Frequency
Impedance
Sensitivity
Signal to noise ratio
THD
Connectivity
Connection type
Memory card slot
Auxiliary port
Wireless RF frequency
Wireless range
Additional information
LED illumination
Dimensions
Weight
Cable length
Warranty
KWS-711
2.1 channel integrated speaker system
2000W
200W
20V
ST-BY, SOURCE, TUN+/NEXT TRACK, TUN-/PREVIOUS
TRACK, VOL+, VOL-
6.5in subwoofer
Two 3in speakers
Subwoofer: 20Hz-130Hz
Speakers: 150Hz-20kHz
Subwoofer: 4
Speakers: 6
870mV
≥60dB
≤ 1 %
AUX, USB, SD
, BT and tuner
TM
USB and SD
TM
Two 3.5mm jacks
2.4GHz
10ft
Adjustable multicolor patterns:
LED1, LED2, LED3, LED4, LED5, LED6, LED(OFF)
(W)12.6x(H)23.3x(D)12.4in
15.4lb (approx.)
5ft
One year

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Kws-711

Tabla de contenido