Conexiones Hacia El Motor - Faro Barcelona OVNI Instrucciones

Tabla de contenido

Idiomas disponibles

INSTRUCCIONES DE SEGURIDAD / INSTRUCTION DE SÉCURITÉ / SAFETY INSTRUCTIONS / INSTRUÇÕES DE SEGURANÇA / SICHERHEITSHINWEISE /

VEILIGHEIDSINSTURCTIES / INSTRUZIONI DI SICUREZZA / Ο∆ΗΓΊΕΣ ΑΣΦΑΛΕΊΑΣ / ИНСТРУКЦИИ ПО ТЕХНИКЕ

VEILIGHEIDSINSTURCTIES / INSTRUZIONI DI SICUREZZA

2. Installing receiver in mounting Bracket:A. Safety

.Warning: High Voltage: Disconnect source of electrical power by removing fuse or switching off circuit

B. Electrical connections:

Make connections as follows, using the terminal block supplied

Make connections as follows, using the terminal block supplied (Fig. 3).

CONNECTIONS OF SUPLY

Connect green ground wire to BARE (ground)

ground wire to BARE (ground) wire.

Connect blue control unit wire to; blue supply wire. LN

Connect brown control unit wire to brown supply wire.

brown control unit wire to brown supply wire.

CONEXIONES HACIA EL MOTOR

Connect blue control unit wire (MOTOR N) to blu

wire (MOTOR N) to blue fan wire.

Connect brown control unit wire (MOTOR L) to brown fan wire.

nit wire (MOTOR L) to brown fan wire.

Connect black orange unit wire(for LIGHT) to orange or red fan wire. (light

black orange unit wire(for LIGHT) to orange or red fan wire. (light)

If wires are different in colour, or you do not feel confident in wiring your fan yourself, have this unit installed by a qualified licensed

If wires are different in colour, or you do not feel confident in wiring your fan yourself, have this unit installed by a qua

electrician

A. Safety precautions:

of electrical power by removing fuse or switching off circuit breaker.

of electrical power by removing fuse or switching off circuit

to; blue supply wire. LN

ТЕХНИКЕ БЕЗОПАСНОСТИ

with dimmer option

dimmer option on ONLY use bulbs adapted for it

Tabla de Contenido

Tabla de contenido