Home Decorators Collection Home Depot SKU 492-724 Manual De Instrucciones página 4

ASSEMBLY INSTRUCTIONS
1. TURN OFF ELECTRICITY at main fuse box (or
circuit breaker box) before beginning installation by
switching circuit breaker off or removing fuse. MIN
90º C SUPPLY CONDUCTORS. CONSULT A
QUALIFIED ELECTRICIAN TO ENSURE COR-
RECT BRANCH CIRCUIT CONDUCTOR.
2. To adjust length of cord, loosen screw on cord
fastener slipping cord through it to shorten or
lengthen cord to desired length. Fasten mounting
strap (A) onto the outlet box using two outlet box
screws (B). Ensure that all supply circuit wires pro-
trude out of the outlet box. Strip ¾ in. of insulation
from wire ends of fixture and of supply circuit wires.
Attach ground supply circuit wire and ground fixture
wires together with wire nut (C). Never connect
ground wire to black or white power supply wires.
Twist stripped wire ends of fixture and supply circuit
wires together black to black (hot) and white to white
(neutral). Twist on wire nuts (C). Tape wire nuts and
wires together. Carefully tuck connected wires and
wire nuts into outlet box. (Alternatively, if there is no
ground supply circuit wire, only attach the ground
fixture wires to the mounting strap (A) with the green
screw (E)).
3. Place the canopy (F) onto the mounting strap (A);
aligning the two canopy side holes with the two side
holes in the mounting strap (A). Secure into place by
screwing two 3/8 in. machine screws (D) through the
two canopy side holes and into the two side holes in
the mounting strap (A).
4. Attach glass shade (H) to lamp holder (I) and
secure in place by placing metal spacer (J) onto lamp
holder and then tighten the socket nut (G) onto lamp
holder (I). Install light bulb (not included). Only use
bulb of the specified type and maximum rated watt-
age or less.
Page 4
E
A
B
Ground
fixture
wire
D
F
Cord fastener
Ground supply wire
Black (hot)
C
White (neutral)
I
H
J
G