COMPLETED EMPTY OF THE DISPENSER.
- To completely empty the dispenser, remove the bottle, carafe or reservoir.
- Operate the taps until the water stops flowing.
- Drain the possible remains of water at the bottom of the tank. To do this remove the rubber
stopper that has the dispenser underneath in the base and wait for all the water to come out.
- Never tip the dispenser. Lift and hold vertically until the water comes out.
HOW TO CLEAN AND DISINFECT THE DISPENSER.
It is recommended to regularly clean and disinfect the dispenser to ensure
water quality consumed. Read carefully the steps you must follow to clean
and disinfect your dispenser:
1. Turn off the switch dispenser and unplug the electric current.
2. Empty the dispenser completely following the previous section of emptying.
3. Refill the internal water tank and add ½ tablespoon of bleach.
4. Let the mixture stand for 10 minutes.
5. Remove the disinfectant mixture by pressing the taps and emptying the entire tank.
6. Circulate two full bottles of water.
7. If a slight taste of bleach remains in the water, you can add a soda pill to the water,
let stand 5 minutes and make it circulate again.
REMOVE DEPOSITS (REMAINS) MINERALS OF WATER.
- Use a solution of water and vinegar, and clean the inner reservoir with a sponge or cloth.
- Do not use a scouring pad as it could leave metallic remains that could damage the
dispenser ducts.
CLEANING OF INTERIOR AND EXTERIOR PLASTIC PARTS.
- It is recommended to clean the spill pan periodically, of the inner tank and the anchor mouth.
- For cleaning, use a neutral soapy liquid and hot water.
- Avoid using abrasive cleaners that can scratch and scratch surfaces.
- Avoid using scouring pads.
- The tray collecting spills should not be used to pour water from glasses.
- Do not clean the dispenser with irrigation water.
- Abrasive products damage plastic surfaces and eliminate their shine
and original touch.
SPECIFICATIONS.
Input: 220-240 V / 50 Hz
Power: 65W
Internal deposit capacity: 700 ML