Jeep RENEGADE Manual De Instrucciones página 18

eco:Drive™
The eco:drive™ application (fig. 4)
allows you to display your driving
behaviour in real time, in order to help
you reach a more efficient
driving style as far as consumption and
emissions are concerned.
4
Additional, data can be saved to a
USB flash drive or by using the
Uconnect™ LIVE App and
processing data on your computer
using the eco:drive™ application
which can be downloaded from
www.jeepofficial. it or
www.driveuconnect.eu
18
Driving style is evaluated by means of
four indices which monitor the
following parameters:
❒ Acceleration
❒ Deceleration
❒ Speed
❒ Shifting
VIEWING eco:Drive™
Press the eco:drive™ button to
interact with the function.
A screen will be displayed showing the
4 indices described above. These
indices are grey until the system has
enough data to evaluate the driving
style.
Once sufficient data are available, the
indices will have 5 colours depending
on the evaluation: dark green (very
good), light green, yellow, orange and
red (very bad).
"Current route index" refers to the
entire value calculated in real time
based on the average of the described
indices. It represents eco-friendliness
of the driving style: from 0 (low)
to 100 (high).
In the event of extended inactivity the
display will show the average of the
indices until that moment ("Average
index") then the indices will be
coloured again in real time as soon as
the vehicle is restarted.
To check the data average of previous
trip (a "trip" is a cycle starting from
when the ignition key is turned on
until it is turned off), select the
"Previous Trip" button (fig. 4).
The details of the previous trip can also
be displayed by pressing the "Details"
button, in which duration (time and
mileage) and average speed will be
reported.