Publicidad
Idiomas disponibles
Idiomas disponibles
Initial operating
of the power tool
Always use the correct supply voltage: the power sup-
ply voltage must match the information quoted on the
power tool identification plate.
Switching the power
tool on / off
Short-term switching on / off
To switch on, press and hold on / off switch 3, to switch
off - release it�
Long-term switching on / off
Switching on:
Push on / off switch 3 and lock it in the position with
lock-on button 4�
Switching off:
Push and release on / off switch 3�
Recommendations
on the power tool operation
Using for blowing operation (see fig. 1)
• To use the power tool as air blower, attach nozzle 2
as shown in picture 1�1�
• Connect power tool to the main�
• Switch on the power tool�
• Perform the blowing operation�
Using for dust collecting operation (see fig. 2)
Do not use the power tool as a vacuum
cleaner without a dust bag 7.
• To use the power tool as a vacuum cleaner, attach
nozzle 2 and the dust bag 7 as shown in picture 2�1�
• Connect power tool to the main�
• Switch on the power tool�
• Perform the suction operation�
The manufacturer reserves the possibility to introduce changes.
Attention! Do not use the power tool as
a vacuum cleaner for collecting solid ob-
jects (such as nails, steel cutting waste,
stones, glass fragments, etc).
Power tool maintenance /
preventive measures
Before carrying out any works on the power tool it
must be disconnected from the mains�
Cleaning of the power tool
An indispensable condition for a safe long-term exploi-
tation of the power tool is to keep it clean� Regularly
flush the power tool with compressed air thought the
ventilation slots 1�
After-sales service and application service
Our after-sales service responds to your questions
concerning maintenance and repair of your product as
well as spare parts� Information about service centers,
parts diagrams and information about spare parts can
also be found under: www.dwt-pt.com�
•
Categorically not to drop any mechanical impact on
the packaging during transport�
• When unloading / loading is not allowed to use any
kind of technology that works on the principle of clamp-
ing packaging�
Recycle raw materials instead of dispos-
ing as waste.
Power tool, accessories and packaging
should be sorted for environment-friendly
recycling�
The plastic components are labelled for categorized
recycling�
These instructions are printed on recycled paper man-
ufactured without chlorine�
English
14
Transportation
of the power tools
Environmental
protection
Publicidad
