Maxon 297117-01 Manual De Instalación página 8

LIFT CORPORATION Sht. 8 of 42 DSG#
14. Reconnect high pressure hose to the new tee
(FIG. 8-1). Do not tighten connectors until
later in this procedure.
15. Connect high pressure hose (Kit
item) to tee and 90° elbow on
hand pump (FIG. 8-2). Do not
tighten connectors until later
in this procedure.
16. Remove plug from hand pump port on
pump manifold (FIG. 8-3).
© MAXON Lift Corp. 2020
M-16-16
RECONNECTING HIGH PRESSURE HOSE
HP HOSE
CONNECTING HIGH PRESSURE HOSE
REMOVING PLUG FROM
Rev. A Date: 04/22/20
FIG. 8-1
FIG. 8-2
HAND PUMP PORT
FIG. 8-3
90°
ELBOW