REV JY-229TB Instrucciones De Instalacion Y Uso página 18

Possible cause
Error
!
The image, The maximum range was exceeded;
the sound is reduce distance / change position of
noisy
camera + monitor.
!
/ disturbed
There is a strong source of disturbance
(e.g. electric motor, radio device etc.)
nearby. The distance between monitor and
camera is too short; this can cause the
monitor to be overloaded. Increase the
distance.
!
Supply voltage is too low, replace battery?).
!
Only one camera may operate on each
channel.
!
Similar devices in the surrounding lead to
interferences, e.g. images from other
systems may appear on your monitor.
!
Chice an other channel on your camera
and monitor.
! A similar system operates in the immediate
Strange image
surrounding. Select another channel or
change location.
Flickering image ! Strong spot or floodlight in the monitored
area of the camera.
Normal sound,
!
System monitor wrongly set
dark or a too
(reset brightness and contrast).
bright image.
!
Strong spot or floodlight in the
monitored area of the camera.
!
Only a white
The supply voltage is too low (recharge
image on the
the accumulator or use mains operation).
!
monitor.
Monitor is wrongly set (brightness control).
17