Rear Panel Connectors - Sonos ZonePlayer ZP80 Guía De Configuración

Sonos ZonePlayer ZP80 Setup Guide

Rear Panel Connectors

Ethernet switch connectors (2)
AC power (mains) input
(~100-240 V, 50-60 Hz)
Analog audio in
Analog audio out
(fixed/variable)
TOSLINK™ digital audio out
Coaxial digital audio out
Analog audio out
Use Category 5 Ethernet cable to connect to a router,
computer, or additional network device such as a
network-attached storage (NAS) device.
Use the supplied power cord to connect to power outlet.
Use a standard RCA audio cable to connect the audio
outputs from a separate audio component such as a CD
player, to the ZonePlayer's analog audio inputs.
Use a standard RCA audio cable to connect the
ZonePlayer's analog audio outputs to the audio inputs on
a separate audio component, such as an amplifier or your
home theater receiver.
You can use a TOSLINK optical audio cable to connect the
ZonePlayer's TOSLINK digital audio output to the audio
inputs on a separate audio component, such as an
amplifier or your home theater receiver.
You can use a digital coaxial cable to connect the
ZonePlayer's coaxial digital audio output to the audio
inputs on a separate audio component, such as an
amplifier or your home theater receiver.
AC power (mains)
input
Analog audio in
11