Installing The Light Fixture; Care And Cleaning; Troubleshooting - HAMPTON BAY S352CH02 Manual Del Usuario

Installation (continued)
3

Installing the light fixture

□ After wires are connected, tuck them carefully inside
the outlet box.
□ Raise the canopy (A) allowing for the mounting
screws (BB) to protrude through the holes on the
canopy (A) and secure with the ball nuts (FF).

Care and Cleaning

□ Clean the light fixture with a soft, dry cloth. Do not use any cleaners with chemicals, solvents, or harsh abrasives.

Troubleshooting

Problem
The bulb will not light.
The fuse blows or a
circuit breaker trips when
the light is turned on.
Possible Cause
□ The bulb is burned out.
□ The power is off.
□ There is a faulty wire connection.
□ The circuit breaker is off.
7
Solution
□
□
□
□
□
□
□
Please contact 1-855-HD-HAMPTON for further assistance.
Replace the light bulb.
Ensure that the power supply is
turned on.
Check the wiring.
Ensure that the circuit breaker is
set in the On position.
Discontinue use of the light
fixture.
Contact a qualified electrician or
call the Customer Service Team
at 1-855-HD-HAMPTON.
Unplug other items on the
circuit.
HAMPTONBAY.COM