Mainstays MS87-020-096-01 Guia De Inicio Rapido página 4

CAUTION
Over tightening the bolt may
strip out the threaded insert.
B
B
2"
(8 used in this step)
1. Unpack the unit and confirm that you have all the hardware and required parts.
2. Position the Desk Top (A) upside down on a level and protected surface as shown.
3. Attach four Legs (B) to the apron corners of the Desk Top (A) with the end dowels fully inserted by
using the 2" Bolts (1) with the Lock Washers (2) and Flat Washers (3) through the drilled holes on the
corner blocks and securely screw into the threaded inserts on the Legs.
4. Stand the desk upright and place it at your desired location.
Assembly Instructions
A
Bolt
①
B
B
Lock Washer
(8 used in this step)
②
4
B
A
3
2
1
Flat Washer
(8 used in this step)
③