Symptom
Remote does not turn on
Remote will not pair
Remote is paired but does not
respond
Diagnosis
Basic
No battery
Battery is dead
Battery was installed backwards
Bluetooth
Remote is not showing up in bluetooth
list
Device being paired to is not in pairing
mode
Remote is already paired to another
device
Remote went to sleep
Remote is out of range of device
Connection was lost
6
Troubleshooting
Remedy
Insert battery (1 X CR2032) into unit.
Remove the old battery from unit and replace it with a new
one.
Remove the battery and reinstall it with the + side of the bat-
tery facing the same direction as the + symbol on the tray.
Press any button to wake the unit up.
Ensure there is a healthy battery installed into the unit.
Toggle bluetooth off then on in the devices bluetooth
settings.
Turn bluetooth off then back on.
Make sure the device is in searching mode.
Go to settings on your device and forget the remote from the
bluetooths history. Press buttons 6-1-2-3 within 3 seconds
and wait for 3 green flashes from the LED then press pair on
the new device.
Press any button on the remote to wake it up.
Move remote/device within the 30 ft range of one another.
(10m).
Unpair the device from the remote, Toggle the bluetooth off
then back on. Try re-pairing to the remote.