Cleaning and replacing the ear pads
The ear pads can be removed from the receiver
and cleaned with soapy water or sterilised by
using the same solution as is used by mothers
to sterilise the teat of a babies bottle. Rinse
under clear water, then let dry well.
Replacement ear pads can be obtained directly
from your local Sennheiser agent.
Technical data
Receiver frequencies
Nominal deviation
AF frequency response
Maximum sound pressure level at 1 kHz
THD at nominal deviation and 1 kHz
Signal-to-noise ratio at nominal deviation
and 500 µV antenna voltage
Power supply
Current consumption
Operating time
Dimensions (in mm) / Weight
Supply schedule
Subject to alterations.
HDE 1030-2 D 1
HDE 1030-2 D 2
HDE 1030-3 UK 1
HDE 1030-2 F 1
HDE 1030
HDE 1030
HDE 1030 F 1
HDE 1030 UK 1
36.64 and 36.72 MHz.
37.16 and 37.82 MHz.
3 frequencies in the range
between 48.00 and 49.99 MHz.
2 frequencies approved in France
One of the following frequencies:
36.64 MHz, 36.72 MHz, 37.04 MHz,
37.16 MHz, 37.82 MHz, 37.98 MHz
Frequency chosen by customer
Frequency approved in France
Frequency approved in the UK
± 8 kHz
50 - 8000 Hz
approx. 112 dB
< 1.5 %
> 57 dB (CCIR 468, peak deviation)
> 68 dBA (DIN 45 500)
BA 90 Accuplug
7 mA
approx. 8 hours
206 x 136 x 22,5 / 55 g
1 Receiver HDE 1030
1 Accuplug BA 90