Personal Safety - Silverline 828919 Manual De Instrucciones

828919

Personal Safety

a) Stay alert, watch what you are doing and use common sense
when operating a power tool. Do not use a power tool while you
are tired or under the influence of drugs, alcohol or medication.
A moment of inattention while operating power tools may result in
serious personal injury
b) Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate conditions will reduce
personal injuries
c) Prevent unintentional starting. Ensure the switch is in the
off-position before connecting to power source and/or battery
pack, picking up or carrying the tool. Carrying power tools with your
finger on the switch or energising power tools that have the switch on
invites accidents
d) Remove any adjusting key or wrench before turning the power
tool on. A wrench or a key left attached to a rotating part of the power
tool may result in personal injury
e) Do not overreach. Keep proper footing and balance at all times.
This enables better control of the power tool in unexpected situations
f) Dress properly. Do not wear loose clothing or jewellery. Keep your
hair, clothing and gloves away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving parts
g) If devices are provided for the connection of dust extraction
and collection facilities, ensure these are connected and properly
used. Use of dust collection can reduce dust-related hazards
Power Tool Use & Care
a) Do not force the power tool. Use the correct power tool for your
application. The correct power tool will do the job better and safer at
the rate for which it was designed
b) Do not use the power tool if the switch does not turn it on and off.
Any power tool that cannot be controlled with the switch is dangerous
and must be repaired
c) Disconnect the plug from the power source and/or the battery
pack from the power tool before making any adjustments,
changing accessories, or storing power tools. Such preventive
safety measures reduce the risk of starting the power tool accidentally
d) Store idle power tools out of the reach of children and do
not allow persons unfamiliar with the power tool or these
instructions to operate the power tool. Power tools are dangerous
in the hands of untrained users
e) Maintain power tools. Check for misalignment or binding of
moving parts, breakage of parts and any other condition that may
affect the power tool's operation. If damaged, have the power
tool repaired before use. Many accidents are caused by poorly
maintained power tools
f) Keep cutting tools sharp and clean. Properly maintained cutting
tools with sharp cutting edges are less likely to bind and are easier
to control
g) Use the power tool, accessories and tool bits etc. in accordance
with these instructions, taking into account the working
conditions and the work to be performed. Use of the power tool for
operations different from those intended could result in a hazardous
situation
Service
a) Have your power tool serviced by a qualified repair person using
only identical replacement parts. This will ensure that the safety of
the power tool is maintained
Heavy Duty Plaster Mixer 1800W
Additional Safety Information for
Mixing Machines
• This machine is designed for mixing water-based liquids with powdered
building materials including, but not limited to thinset, sealing and
levelling compounds, cement, grout, textured coatings, etc.
• With the correct accessory attached, this tool may be used to blend
dispersion paints, varnish, resins and other coatings
• This machine is NOT intended to be used with dusty compounds such as
graphite, or with salt solutions, corrosive agents or liquid manure
• This product does NOT satisfy food hygiene standards and is NOT to be
used for preparing food or as a kitchen appliance
• Always use the CORRECT mixing paddle or accessory for the material
being mixed. Working with an incorrect accessory might overload the tool
and lead to spillage, insufficient blending or personal injury
• Always inspect the power cord and connector before use. If you locate
any damage, have the cord replaced by a qualified electrician before
attempting to use the machine
• Before use, check the accessories are safely installed
• NEVER use the machine in damp or wet locations. If the machine gets
wet, ensure it is disconnected from the power supply and ensures it dries
COMPLETELY before further use
• ALWAYS position yourself securely, maintain sure-footing and operate the
tool with BOTH hands
• DO NOT attempt to mount the tool on a stand or tripod. NEVER leave the
machine running unattended
• Unplug the machine from the mains power supply after EVERY use, to
avoid accidental switch-on
• Always route the power cord towards the rear of the operator, AWAY from
the machine and work area. Ensure that the cable does not present a
tripping hazard for the operator and other people in the vicinity
• If you are using this machine with an extension lead, always unwind the
cable completely.
WARNING: This tool may ONLY be connected to power supplies that are
protected by a RCD device. Test the function of any RCD regularly.
www.silverlinetools.com
5