Network Setup - Wiseup WIFI07 Guia Del Usuario

yellow, which means the camera's WIFI signal is ready.
IV. Network Setup
4.1. Install the "Camwf" APP on Your iPhone or iPad
Search for "Camwf" in App Store and install it on your iPhone or iPad.
4.2. P2P Connection Setup (LAN Mode)
4.2.1. Go to WLAN Setting page on your iPhone or iPad, connect your iPhone or iPad to
the camera's WIFI signal named "RT-*****". Wait for the WIFI to be connected and your
phone status bar will appear WIFI symbol as below:
[Note]:
If the camera's WIFI signal cannot be found after a long time, please reset it (See VIII)
or recharge the backup battery only if the camera is powered by the backup battery (See X).
4.2.2.Run the "Camwf" APP.
4.2.3. Add the camera to the "Camwf" APP as below: