HAMPTON BAY 52050 Guía De Uso Y Cuidado página 13

Assembly - Assembling the Fan Without the Light Kit
1
Assembling the fan without the
light kit
□
In order to use the fan without the light kit, remove the
switch cup cover (WW) from the top of the light kit fitter
assembly (E) by removing the center hex nut inside the
switch cup cover (WW), and then thread the switch cup
cover (WW) off of the threaded nipple on the top of the
light kit fitter assembly (E).
□
Press the plastic plug (FF) into the center hole of the
switch cup cover (WW).
□
Remove the three screws (VV) on the switch cup cover
(WW).
□
Align the three holes in the switch cup cover (WW)
with the three holes in the switch cup of the fan-motor
assembly (D). Make sure the notch in the switch cup
cover (WW) clears the reversing switch in the switch cup
of the fan-motor assembly (D).
□
Re-install the three screws (VV) that were removed in first
step to secure the switch cup cover (WW).
V V
13
Please contact 1-855-HD-HAMPTON for further assistance.
EE
WW
FF
HAMPTONBAY.COM