Publicidad
Idiomas disponibles
Idiomas disponibles
Targeted
Massage Buttons
Zone buttons activate
motors to massage specific
areas: upper back, lower
back and seat. Customize
your massage by choosing
one specific area, any
combination of areas, or all
three at once. To select a
massage area, simply push
the button and the
corresponding L.E.D.
light(s) will illuminate. To
deselect, simply push the
button again and the
corresponding L.E.D.
light(s) will turn off.
Power Adaptors
This massager is powered
by a custom 120 volt AC
home adaptor, and 12 volt
DC auto adaptor (cigarette
lighter plug-in style). Both
are included with your unit.
NOTE:
When selecting
the heat feature with
massaging action, there
will be a slight decrease
in the strength of the
massage output. This
adjustment is perfectly
normal and should not be
interpreted as a defect.
6
Speakers
Two built-in aluminum cone
speakers play your favorite tunes.
Speakers are activated when the
adaptor is connected and plugged
into an electrical outlet. Simply
connect your audio source (MP3 or
Portable CD Player) to the built-in
audio plug. Control the volume on
Calor
your audio source and the
massage plus heat on the
integrated hand control. PLEASE
NOTE: You can use the speakers
Calor
with or without massage.
Massage On/Off
Before connecting power source,
be sure the hand control is in the
far left off position. Control the
massage function with the
integrated hand control. Select
Low or High to activate the
massage and select a zone to
begin the massage function. To
turn the power off, slide the switch
to the far left OFF position, the LED
light(s) will turn off.
Heat
Soothing, penetrating heat is
activated by pressing this button.
To turn off heat, simply press the
button again.
PLEASE NOTE:
The heat
option will only work while a
massage feature is selected.
2 Aluminum
Cone Speakers
5 Massage
Motors
Soothing
Heat
Input jack for car
Connect MP3 or
Portable CD Player to
the built-in audio plug
7
Pressure
Activated
Switch
Publicidad
