Indicates a hazardous situation which, if not avoided, could result in death or serious injury. Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. Addresses practices not related to personal injury. Page 2 For technical questions, please call 1-888-866-5797. Item 67847...
Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source or moving the compressor. Item 67847 For technical questions, please call 1-888-866-5797. Page 3...
State of California to cause birth defects (or other reproductive harm). (California Health & Safety code § 25249.5, et seq.) SAVE THESE INSTRUCTIONS. Page 4 For technical questions, please call 1-888-866-5797. Item 67847...
Página 5
Cubic Feet per Minute flow Canadian Standards Association Cubic Feet per Minute flow SCFM Underwriters Laboratories, Inc. at standard conditions National pipe thread, tapered Volts Alternating Current National pipe thread, straight Amperes Item 67847 For technical questions, please call 1-888-866-5797. Page 5...
Safety Valve (73) Tank Pressure Gauge (53) Quick Coupler (76) Output - for attaching Pressure in-line shutoff Gauge (77) valve, air hose and tool Drain Valve (66) Figure A: Functions Page 6 For technical questions, please call 1-888-866-5797. Item 67847...
Página 7
(all sold separately), as shown on Figure F on page 8 and Figure G on page 9. Consult your air tool’s manual for needed accessories. Item 67847 For technical questions, please call 1-888-866-5797. Page 7...
(OVERFILL as shown above) on the sight glass. Do not add or change the oil while the compressor is in operation. Allow the compressor to cool before replacing oil. Page 10 For technical questions, please call 1-888-866-5797. Item 67847...
Página 11
2. Locate the Compressor on a flat level surface to ensure proper pump lubrication and to prevent damage to the unit. Keep at least 12″ of space around the unit to allow air circulation. Item 67847 For technical questions, please call 1-888-866-5797. Page 11...
Close the valve after moisture has drained out. Do not remove the Drain Valve. 16. Clean, then store the Air Compressor indoors. Page 12 For technical questions, please call 1-888-866-5797. Item 67847...
Página 13
An air leak or open hose causing the compressor to cycle too often and build up heat. 3. Correct any issues before further use to avoid damage to the compressor. Figure I: Reset Button Item 67847 For technical questions, please call 1-888-866-5797. Page 13...
Air Compressor is pressurized. Look for air bubbles. ** To clean the compressor surface, wipe with *** Use SAE 30W, non-detergent, a damp cloth, using a mild detergent or mild solvent. Air Compressor Oil only (sold separately). Page 14 For technical questions, please call 1-888-866-5797. Item 67847...
If working in dirty environments, you may need to replace the filter more often. 1. Remove the Cover. 3. Replace with a new Air Filter. 2. Remove the Air Filter. 4. Replace the Cover. Item 67847 For technical questions, please call 1-888-866-5797. Page 15...
Página 16
2. Reposition unit on a level surface. 3. Crankcase vent clogged. 3. Clean Crankcase vent. Follow all safety precautions whenever diagnosing or servicing the compressor. Disconnect power supply before service. Page 16 For technical questions, please call 1-888-866-5797. Item 67847...
Página 17
LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Item 67847 For technical questions, please call 1-888-866-5797. Page 17...
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 18 For technical questions, please call 1-888-866-5797. Item 67847...
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.