XD P330.651 Manual Del Usuario página 6

2. aPP GuIDE
Note: Make sure to download the "Navigator sport" App first in order to detect/check
your heart rate and step counts. This product works properly only if you wear the
earbuds correctly.
a) Make sure your phone is connected to the Bluetooth device "Navigator Pulse 1" first.
If you have not connected yet, please following the instructions above. (go to "Pair the
device" to see instructions)
b) Open the Navigator sport App and choose to log in or skip to next page, you will
enter the main screen.
c) Go the tab "setup" below and choose for "Bluetooth connection" in order to connect
with the Bluetooth device. Note: you need to pair twice with the Bluetooth device
"Navigator Pulse 1". Bluetooth connection for music and app are separated; needs to
be connected twice!
d) Then hold the line control button (6) until the heart rate sensor (2) lights up in yellow.
The App will show the device name "Navigator Pulse 1". Choose this device to connect.
Once connected, you will see "connect success".
e) After connecting successfully, go back to main screen and click on the Bluetooth icon
in the above left corner in order to complete and finish the connection. The Bluetooth
icon will turn green when done correctly.
f) When double click the line control (6), you will enable the sport mode. You will hear
"sport mode on". You can check your latest (counted) steps, distance and heart rate. By
switching from tabs (Heart rate, Step Counter) you can check the history of your data.
By double clicking the line control (6) again, you will disable the sport mode. You will
hear "sport mode off".
6