Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
CHARGING
Please make sure that the PM10 karaoke speaker is fully charged before first use.
•
Connect the product with USB cable.
•
The indicator will show red light when charging.
•
The indicator will turn off when fully charged.
POWER ON/OFF
1.
Long press the Power On/Off button to turn it ON or OFF.
2.
The first long press Power button, then enter the Bluetooth Pair Mode.
3.
Shot press the Power Button to change the lighting Mode.
4.
TF card music playing will automatically switch when inserted TF card. Voice prompts will sound before Bluetooth pairing and TF card
music playing.
Button ICON
1.
Short poke the knob downward to play the next song and long poke to Volume up.
2.
Short poke the knob upward to play the last song and long poke to Volume down.
3.
Click knob to play or pause the music.
4.
Slide the Echo Key upward to adjust the echo to big, slide the echo key downward to adjust the echo to small.
5.
Slide the Volume Key upward to adjust the Mic Volume to big, slide the Volume Key downward to adjust the Mic Volume to small.
Bluetooth Pairing
Play music from Bluetooth enabled devices, like smart phones, table PC, computer and etc.
This speaker supports the Bluetooth device with A2DP function. Slide the power witch first, then enter the Bluetooth mode. Bluetooth indi-
cate blue flicker alternately, together with voice prompts, the speaker is in impairing state at this moment, and only in the state Bluetooth can
be impaired and connected successfully. Note: Please take out TF card for Bluetooth Mode.
Mobile phone connection:
Step1.Open the Bluetooth setting on your phone or tablet and click 'Search device', cellphone will search for Bluetooth devices automati-
cally.
Step2.Find the Bluetooth Speaker name, click and connect it.
Step3.Enter '0000' and click OK if there a prompt that requires you to enter a password.
Bluetooth paring and connection
1.
If the speaker has been connected with Bluetooth devices before, it will connected the last Bluetooth device automatically once it is turn on.
2.
If the speaker has not been connected with Bluetooth device before, it will enter impairing mode, click connection is achievable.
3.
Other phone or tablets can not be connected with the Bluetooth when the speaker is being connected with a phone or tablet.
4.
The phone or tablets can not be connected with the Bluetooth if it is connecting with other Bluetooth device. You should turn off your
Bluetooth connection and connect your phone with Bluetooth speaker again.
* PM10 cannot be used as a handfree speaker for call
Lamp Function
1. Short press power button , turn on the light.
2. Short press power button to change the color.
STEP:
ON
--> level 1.Red
--> level 2.Dark Blue
--> level 3.Green
--> level 4.Pink
--> level 5.Sky Blue
--> level 6.cyclic change
--> level 7.Along with the music rhythm changes
--> OFF.
FAQ
1.
The power light is not lit:
Please check the USB cable and charge it.
2.
The microphone has no sound.
Please turn PM10 power on and adjust the volume to big.
3.
The microphone has no echo.
Please adjust the echo to big.
4.
The sound has noise.
Please confirm whether environmental interference.
5.
The music is no sound.
Please adjust the volume from cell phone or adjust the knob downward from PM10.
ENGLISH
Publicidad
Tabla de contenido
